Click the LISTEN HERE tab below to hear an interactive sound demo of this pickup.
ALNICO V / D.C. =8K- A sweet-sounding Humbucking Jazz pick-up designed for use with traditional Arch Top guitars. This version has a suitable mounting bracket attached for neck mounting. Made in the tradition of the Johnny Smith endorsed Gibson's introduced in the early 1960's but with the added advantage of adjustable polepieces allowing for completely equalizing string-to-string volume balance.
The Jazzy Joe Jazz Pickup from Kent Armstrong is intended for mounting to the end of a guitar's fingerboard. The two mounting tabs wrap around the outside of the fingerboard and the pickup is attached with the four screws. Once you have the tabs properly profiled to fit the neck, mark the four mounting tab holes on the edges of the neck and drill 1/16" pilot holes for the screws. The tabs can be bent with pliers to match your fingerboard's width and profile. Wrap the jaws of the pliers with electrical tape to protect the pickup. You may also find it necessary to "tweak" the angle of the mounting tabs relative to the face of the pickup. This will insure that the pickup is parallel to the stings. When bending the tabs, grasp them near the pickup housing and gently bend them the desired amount. Try to avoid re-bending.
There are two solder lugs on the bottom of the pickup ready for your wiring. We recommend purchasing our Gibson braided wire. The lug closest to the mounting tabs is the ground or shield lug, and it should be wired to the Gibson wire's outer braid. The inner conductor of the wire will connect to the inner or hot lug. You can run the pickup straight into output endpin jack, or you may choose to use onboard volume and tone controls. These controls can be mounted to the instrument's pickguard, or into holes drilled into the face of the guitar. 500k for brighter tone, 250k for warmer tone.
ALNICO MAGNET/ D.C. RESISTANCE =8K ,
Polepiece spacing 50 mm
Overall pickup legnth - 69mm
Overall pickup width - 29mm
Pickup depth - 12mm
Distance between the two mounting bracket legs - 58mm.
Mounting bracket length of leg - 25mm
Our standard shipping terms:
Any order placed before 2.30pm on a working day will generally be sent the same day. If the order is placed after 2.30pm on a weekday or anytime during the weekend or a public holiday we will send the order the next working day.
If you need to return a product purchased from Armstrong Pickups, please notify us in writing (email/letter) within 14 working days and then return the item to us within 28 working days in order to receive a full refund without the original delivery charge. The cost of returning the item to Armstrong Pickups is not included unless the return is due to missing or faulty parts.
The returned goods must be in a re-saleable state and any goods or accessories that accompany the returned product must also come back to us. The goods should also be returned with their original box, packing and accessories. Please click here for further details.
We offer Paypal as the payment gateway on our website.
PayPal accepts all major credit and debit cards and no cardholder information is ever passed unencrypted and any messages sent to our servers from PayPal are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to PayPal's servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.
When you pay with Paypal, all information is protected by SSL with an encryption key length of 168 bits (the highest level commercially available). Your personal information is stored on Paypal's servers and heavily guarded, both physically and electronically. To further shield your credit card and bank numbers, Paypal do not directly connect their firewall-protected servers to the internet.